When NOT to rinse your panels with a hose
A hose rinse seems harmless. Done wrong, it bakes mineral deposits onto your glass permanently.
What you'll learn
- Why San Diego tap water leaves permanent calcium spots on hot panels
- Why pressure washers crack tempered glass and void warranty
- Why scrubbing with abrasive brushes strips the anti-reflective coating
- When a quick gentle rinse is safe (early morning, cool panels)
Step by step
- Never spray panels in direct midday sun — water flashes and minerals bond.
- Never use a pressure washer on solar glass.
- Never use household cleaners, vinegar, or dish soap.
- A pre-dawn gentle hose rinse on cool panels is OK as a stopgap.
- For a full clean, book a deionized-water soft wash.
Safety note
Hard water spotting from a midday hose rinse is one of the most common reasons people end up calling us — and it can require professional restoration to fully remove.
Rather have a pro handle it?
Same-day electrical service across San Diego County. A real electrician picks up.
More guides
Keep learning.
Basics · 4 min watch
Check your solar production data
The first step before booking a cleaning — confirm your panels are actually losing production.
Basics · 3 min watch
Do a 60-second visual check from the ground
You don't need to climb the roof. A pair of binoculars from the driveway tells you most of what you need to know.
Maintenance · 4 min watch
What to do after a wildfire ash event
Santa Ana ash can drop production 15–30% in days. Quick, careful response keeps panels from etching.